TIPS ABOUT HOW TO Extend Smok Pen Recharge Time


TIPS ABOUT HOW TO Extend Smok Pen Recharge Time

The Smok Pen is really a new pen that was developed by two guys in California. They wished to create a cool writing instrument that looked like a genuine pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has taken the market by storm.

smok pen

The Smok Pen has a built quality that’s just great. I came across that even though it is an electronic pen the build quality is simply as good as the pens that I have reviewed. For the reason that of how they made the most notable cap. You don’t have to worry about the cap cracking or breaking you Smok Valve Pen.

Both biggest differences that separate the Smok Valve from other pens may be the form of the coils and the way that they are built. Generally the coil on a Smok Pen is larger than on other pens. I believe that they did this on purpose, to make the pen feel more substantial.

If you take a look at a Smok Pen, you will notice that your body of the pen is round rather than smooth like other pens. On the back of the pen there exists a little tab that houses the coil. Once you press on the tab you can actually turn the heating element on / off. I must say i liked this feature because Puff Bar Flavors it allows me to utilize the Smok Pen 22 whenever I feel like smoking.

To use the Smok Pen you should keep carefully the heat button pressed. Once the button is pressed, the heating element will start to warm up. Once it gets to the appropriate temperature it is possible to turn off the heating element. Smok recommends using a 22mm tank. I prefer a larger tank, but that’s just me.

Once you put your Smok Pen into the tank you will see a indicator light seriously. The indicator light will stay green if you don’t put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is very important always put your pen into the charger before you apply the e-liquids to the coil heads. It is also important to do that before putting your e-liquids into the coil heads.

After you have completed this step, it is best to check to see if you are at the proper temperature for the coils to fire. If not then you should turn the power off and try again. Should you be still not satisfied together with your Smok Pen i quickly suggest you take it in for some troubleshooting. This is exactly what I’d call the “troubleshooting process” because sometimes things just usually do not work as they should. It is suggested that you perform the next two steps, then go on and check the Smok Pen to see if it still has the electronic charging port.

Before you go any further you should remove the battery from your own pen and unscrew the magnetic cap. You need to then remove the plastic sleeve that holds the sub-ohm. You will find a wire that runs through the Smok’s body which is green in color. You need to loosen this wire using pliers. Once you have loosened this wire after that you can access the sub-ohm. You should then remove the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful to not touch any of the coils.

When you have placed the sub-ohm tank into the pen you should then place the rest of the components including the wattage, the batteries and the heating element into the included microwaveable microwave oven. Start the power and follow the on screen instructions. You should place the pen’s battery into the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it cool off. When you initially put the pen in to the microwave the electronic reading will show a low voltage protection setting. If this setting does not automatically get set you then should follow the on screen instructions.

After the Smok Pen has reached the temperature that it needs to reach you need to then connect the two wires to the positive and negative on the positive post on the Smok unit. You need to then connect another end of the battery to the negative post on the negative side of the Smok unit. The final step would be to connect the positive cable to underneath of the Smok’s power switch.

After all the components have been placed into the pen, you should turn the power on. Following the first test run, you need to be able to see the battery life indicator light come on. If you do not see any sign of life from the Smok Pen, you need to remove the battery from the pen and then replace it with a fresh one. For your convenience gleam green light that could be pressed as a way to confirm the battery charging status. If you have done these things and you also do not see the green light indicating charging, you should replace the battery.